The Rosin Press utilizes accurate temperature control, impressive amounts of pressure, and heated plates to create a solvent less concentrate called Rosin.
The Rosin Press was specifically designed for cannabis and hemp. Our unique plate size allows you to press over an ounce of product each press and because our tube size is the same size as our heat plates your Rosin is removed from the heat instantaneously.
The Rosin Press was intentionally designed as a manual jack and not pneumatic. We have found that it is best to press rosin by touch. In other words, using pneumatic pressure does not allow you to feel when the initial pressure is achieved. In order to avoid blowing out the tubes and to get the most yield and best quality, it is necessary to lightly Engage the product and allow the material to heat up slightly before truly pressing. Using a manual jack gives you better control over the speed of the press and the engagement with the material.
The Rosin Press can press over an ounce of product every 1-2 minutes and can achieve up to 60% yields when pressing quality keif or bubble hash.
Rosin Press – $4000
Step 8 of 8 – Ez Trim Harvesting System
Weight: 115 lbs.
Ship weight: 140 lbs.
Assembled Dimensions: 21″L x 20″W x 49″H
Ship Dimensions: 32″L x 32″W x 54″H
Production (single operator): 1.5 oz / press
MSRP: $ 4,000.00
Materials Exposed to Plants:
Aluminum 6061 – FG; Nylon (70-90 Micron) – FG
UL Certified Components:
PID Controllers with Thermocouple; Relays; Heating Elements; Rocker; Switch; Power Cord; IEC Jack
120 VAC; 60 HZ; 6 Amps; 720 Watts (Not pneumatic)
The Rosin Press can press over an ounce of product every 1-2 minutes and can achieve up to 60% yields when pressing quality keif or bubble hash. Conservatively, if you pressed an ounce every 2 minutes at 30% yield and $30 per gram cost to wholesalers, the Rosin Press will have paid for itself in under 20 Presses and under 60 minutes.
Kief – Up to 60%
Hash – Up to 60%
Flower – Up to 20%
Trim – Up to 10%