The Ez Trimmer achieves the best wet and dry trimming results over all other trimming methods. Originally designed before 2010, Ez Trim has worked hand in hand with growers of all sizes to evolve our machine into a “can’t live without” tool for operators around the world. The Ez Trimmer allows you to get the speed, control, and adjustability needed to achieve a high level of quality, regardless of strains or growing methods.
The key to the Ez Trimmers superiority is not only that it is quiet, light-weight, and filters yout trim, but that it allows the user to adjust the way in which it trims for wet and dry product, as well as different strains, sizes, and densities.
Ez Trimmer – $10,000
-Direction and Speed of the Fingers
-Trim Filtration Options
-Air Flow Control
-Specialty Grates for Wet/Dry Trimming
The Ez Trimmer works by utilizing a fan blade under its cutting blade that does several things in terms of airflow. First, the fan blade creates suction to pull the leaf down through the grate and into the filtration bags, second, it creates a controllable vortex that assists in moving and dispersing the product as it’s trimmed, and lastly, it agitates the clipped leaf in the filtration bags helping to remove the trichomes as they are filtered through the bags.
The airflow is controlled with the airflow controller and the two small inner lids on the top of the machine. With one or both the inner lids open the suction will increase and the vortex will decrease. This allows you to create a stronger vortex to assist in the movement of wet or heavier product, or less of a vortex and more suction for slowing down the movement of dry or larfy product. The airflow controller is used to prop open the back inner lid in smaller increments, adjust the position of the airflow controller based on strain and density. In addition to the lids and airflow controller, you can also adjust the airflow by changing the speed of the main motor. Additionally, you can use the back inner lid to assist in the exiting of the product when the trim cycle is complete, simply pump the lid open and closed as the product empties into the chute.
The rotor and silicone fingers are used to help disperse and roll the product along the grate. The rotor speed and direction can be controlled. Slowing down the rotor will minimize agitation on delicate product, while running the rotor on higher speeds or in reverse (Against the flow of the vortex) can create more agitation. Typically we recommend that you run the rotor in the forward direction and at higher speeds. Again, this is something you will want to adjust based on strain, density and personal preference.
In addition to the adjustability of the cutting blade height, suction and vortex, and rotor fingers speed and direction, the Ez Trimmer also comes standard with two different trimming grates. The wet grate is for wet trimming and comes with ¼” open slots and the dry grate that has ⅛” open slots. The dry grate is placed on top of the wet grate when trimming dry.
The trim collection from the Ez Trimmer is unmatched by any other trimming machine. After being cut, the trim falls into a 4-layer trim sifting system that grades your leftovers from leaf to kief. Once in the bags, your trim remains undamaged by any sources of agitation like heat, compression, or movement. Being able to make high-quality extracts from your trim is key to maximizing the profits from your harvests.
Our patented and unique filtration system comes with four collection bags with varying micron levels for separating and collecting the leaf as it’s trimmed. The first bag collects the larger leaf and stem, this product is good for extraction but contains and separates the majority of the chlorophyll filled leaf. The second bag collects your sweet leaf and is excellent for extraction and pre-rolls. The third bag is your B grade keif and the fourth bag is your A grade keif. Separating the trim and keif can create more control over potency levels when extracting. These bags can also be utilized as a dry sifter.
Weight: 110 lbs.
Ship weight: 125 lbs.
Assembled Dimensions: 32″L x 43″W x 43″H
Ship Dimensions: 32″L x 32″W x 48″H
Production (single operator): 20-30 lbs./hr. (Wet trimming in wet weight, dry trimming in dry weight)
MSRP: $ 10,000.00
Materials Exposed to Plants:
Aluminum 6061 – FG; Stainless Steel – FG; Silicone – FG; Nylon – FG
UL Certified Components:
5 wire harness(Control Box); Dayton Gear Motor; Fuse Holder; AC to DC 5V Power Supply; 4 Channel DC 5V Relay Module; Touch Screen; Motor Speed; Controller; Control Box Micro Controller; 9′ power chord; Meanwell power supply; Main Motor; Capacitor
120 VAC; 60 HZ; Single Phase; 10 Amps; 1200 Watts
We recommend flash drying to achieve the necessary crispness for the outer leaves while leaving the inner bud moist and sponge-like. See some tips and tricks below:
The leaves are ready for trimming when they snap when agitated and do not bend